Hey there, whether you know your size and are looking for a few tips, or if you have no idea where to start, this guide will help you to find the perfect size for you!
Follow the instructions below to determine your wrist size. The general rule for finding your bracelet size is to add 2cm (0.8in) to your wrist size measurement.
| Bracelet Length | Inches | 6.3 | 6.7 | 7.1 | 7.5 | 7.9 | 8.3 | 8.7 |
|---|---|---|---|---|---|---|---|---|
| cm | 16 | 17 | 18 | 19 | 20 | 21 | 22 |
Step 1: Use the tape measure or a strip of paper to measure your wrist.
Just wrap the soft tape measure around the broadest part of your wrist and take note of the length. If you are using a plain strip of paper, mark your size with a pen or pencil then use a ruler to measure the length (The starting end of the paper must be at the base of the ruler and marked 0). That would be your wrist size.
Step 2: Add one inch, or 2.5 centimeters, onto this measurement to get the final length of your bracelets.
Please make sure there’s enough space to tuck in 2 fingers as this is the space you need to add the charms. If you want to add less than seven charms, add 2 centimeters are ok. If you plan to wear eight or more charms, please add 3 centimeters. If you purchase a bangle, just choose the next size from your actual wrist measurement.
Notes:
1. A bracelet is perfectly sized when you measure your wrist tightly and add 2 or 3 cm.
2. If you are between sizes, ask yourself how you like to wear your bracelet. If you wear it tightly choose the smaller size and if you like to wear it loosely take the next size up.
3. Please be aware that when you receive a new bracelet it will feel stiff, which can make it uncomfortably tight. The bracelet will quickly soften and become more flexible as you wear it.
4. Bear in mind that the more charms you add to your bracelets, the tighter they will become.
Finding the right ring size is crucial to ensure a comfortable and secure fit for your jewelry. Whether you’re shopping for a special occasion or just treating yourself, it’s important to know how to measure your ring size accurately. In this guide, we’ll walk you through some simple methods to determine your ring size at home. So, before you make your next purchase, take a few minutes to measure your ring size and ensure a perfect fit.
To measure your ring size, you can use a ring sizer, which is a set of plastic or metal rings in various sizes.
Alternatively, you can measure your ring size at home using a piece of string or a strip of paper. Here’s how:
- Cut a strip of paper or a piece of string about 3/4 inch wide.
- Wrap the paper or string around the base of the finger where you want to wear the ring. Make sure the paper or string is snug but not too tight.
- Mark the spot where the paper or string overlaps.
- Measure the length of the paper or string from the end to the marked spot in millimeters.
- Use the table below to find your ring size based on the length in millimeters or in inches.
| Ring Size | Inside Circumference (mm) | Inside Diameter (mm) | Inside Circumference (in) | Inside Diameter (in) |
|---|---|---|---|---|
| 5 | 49.3 | 15.7 | 1.94 | 0.62 |
| 5.5 | 50.6 | 16.1 | 1.99 | 0.63 |
| 6 | 51.9 | 16.5 | 2.04 | 0.65 |
| 6.5 | 53.1 | 16.9 | 2.09 | 0.67 |
| 7 | 54.4 | 17.3 | 2.14 | 0.68 |
| 7.5 | 55.7 | 17.7 | 2.19 | 0.70 |
| 8 | 57.0 | 18.1 | 2.24 | 0.71 |
| 8.5 | 58.3 | 18.5 | 2.29 | 0.73 |
| 9 | 59.5 | 18.9 | 2.34 | 0.75 |
| 9.5 | 60.8 | 19.4 | 2.39 | 0.76 |
| 10 | 62.1 | 19.8 | 2.44 | 0.78 |
Notes:
Keep in mind that the width of the ring can affect the fit, so if you’re getting a wider band, you may want to go up a half or full size. Additionally, if you’re between sizes, it’s generally recommended to go up to the next whole size.